
DynaCaster
Front-addressed cardioid dynamic microphone with a built-in pop filter, shockmount and stand mount, plus a switchable +30 dB active preamp. Aimed at podcasters, streamers, broadcasters and vocal or instrument recording.
- Front-addressed cardioid dynamic with aluminum voice coil
- Switchable preamp adds 30 dB gain (needs 48 V phantom)
- Two recessed EQ switches give six configurations
- Built-in 3-layer pop filter and shockmount
- All-metal body with gold-plated 3-pin XLR
- Frequency range 20 Hz - 19 kHz
Bilder
7Annonser
Inga annonser för den här modellen än
När någon säljer en DynaCaster visas annonserna och försäljningshistoriken här.
Sälj en likadanBeskrivning
The DynaCaster DCM8 is an all-metal dynamic microphone with an aluminum voice coil and neodymium magnet, using capsule technology derived from the maker's V Series dynamics. It has a cardioid pattern and is addressed from the front, which helps reject room noise around a close source.
A switchable preamp adds 30 dB of gain when engaged and 48 V phantom power is supplied. With the switch off, the microphone works passively and needs no external power. Two recessed switches give up to six EQ configurations, covering low-end and high-end shaping, such as trimming boominess or sibilance, and the recessed placement protects settings from accidental changes.
A three-layer pop filter and a shockmount are built into the body, so no external accessories are needed. The integrated stand mount swivels widely and fits a range of boom arms. Connection is by a gold-plated 3-pin male XLR. The package includes an external windscreen, a thread adapter, a sticker and a manual with warranty card.
Video
Specifikationer
- Märke
- sE Electronics
- Modell
- DynaCaster
- Kategori
- Studio › Mikrofoner
Audio
- Capsule
- Dynamic
- Voice coil
- Aluminum
- Magnet
- Neodymium
- Directional pattern
- Cardioid
- Frequency range
- 20 Hz - 19 kHz
- Sensitivity
- 2.0 / 60 mV/Pa (-54 / -24 dBV)
- Preamp gain (switchable)
- +30 dB
- EQ configurations
- Up to 6 (two recessed switches)
Power
- Powering
- 48V Phantom Power (P48 according to IEC 61938)
- Current
- 3.0 mA
- Electrical impedance
- 300 / 135 Ohms
- Recommended load impedance
- > 1k Ohms
Connectivity
- Connector
- 3-pin male XLR (gold-plated)
Physical
- Diameter x length
- Ø 62 x 220 mm (ø 2.44 x 8.66 in.)
- Weight
- 850 g (29.98 oz.)
- Housing
- All-metal, matte black finish
- Pop filter
- Integrated 3-layer
- Shockmount
- Integrated
In the box
- Microphone
- DynaCaster
- Windscreen
- External windscreen
- Adapter
- Thread adapter
- Extras
- sE logo sticker
- Documentation
- User manual with warranty card