Switchbone JX-2 ABY
The Switchbone JX-2 ABY is an ABY amp selector pedal for guitarists who want to drive two amps, or two amp channels, from one instrument. It has a class-A buffered signal path, a transformer-isolated second output, a variable booster and a dedicated tuner output.
- ABY amp selector with A/B and combine footswitches
- 100% discrete class-A buffered signal path
- Drag control for pickup load correction
- Transformer-isolated second output removes ground loops
- Variable booster with 3-position mid-boost switch
- Always-on buffered tuner output; discontinued model
Bilder
6Annonser
Inga annonser för den här modellen än
När någon säljer en Switchbone JX-2 ABY visas annonserna och försäljningshistoriken här.
Sälj en likadanBeskrivning
The Switchbone JX-2 ABY switches one instrument signal between two amps, or sends it to both at once. Three footswitches handle A/B selection, combining the amps and engaging a built-in booster. Photocell switching ramps the signal up and down to avoid the pops of passive switchers, and flashing LEDs show which amp was selected last.
The signal path is a 100% discrete class-A buffer, using the same circuit as the Radial JD7 Injector. A Drag control restores the natural interaction between pickup and amp that buffering removes, and it also allows cable runs of up to 15 m (50 ft) without noise. The second output is transformer-isolated to break ground loops, and a 180° polarity reverse switch keeps both amps in phase.
The booster has a variable level control and a 3-position mid-boost switch for extra cut when soloing. It can be bypassed and turned into a mute switch for silent tuning. A separate buffered tuner output is always active. The manufacturer lists the unit as discontinued.
Specifikationer
- Märke
- Radial Engineering
- Modell
- Switchbone JX-2 ABY
- Kategori
- Effekter och pedaler
Switching
- Function
- ABY amp selector
- Footswitches
- 3 (A/B select, combine amps, boost)
- Switching method
- Photocell ramp-up, pop-free
- Status indicator
- Flashing LEDs show last-selected amp
- Use as channel selector
- Yes, for two amp channels
Audio
- Signal path
- 100% discrete class-A
- Buffer circuit
- Same as Radial JD7 Injector
- Pickup load correction
- Drag control
- Maximum cable run
- Up to 15 m (50 ft)
- Polarity
- 180° polarity reverse switch
Outputs
- Amp outputs
- 2 (A and B)
- Output B isolation
- Transformer isolated, ground-loop elimination
- Tuner out
- Separate, always on, buffered
Booster
- Boost level
- Variable level control
- Mid control
- 3-position mid-boost switch
- Boost bypass mode
- Convertible to mute switch for tuning
Physical
- Construction
- Hand-inserted parts on double-sided through-hole PCB
- Part number
- R800 7080 00
Software
- Documentation
- User Guide available