FINEO FO 10
Passive two-way mid/high loudspeaker with a 10-inch woofer and 1-inch compression driver, intended for fixed installations in dry indoor spaces. Suits speech and music reinforcement and pairs with subwoofers for fuller low end.
- Passive 2-way, 10" woofer + 1" compression driver
- 300 W RMS, 600 W program, 1200 W peak at 8 ohms
- Max SPL peak 123 dB
- Rotatable 80° x 60° constant directivity horn
- Ball impact certified to DIN 18032-3
- NL4 Speakon input and parallel output
Bilder
8Annonser
Inga annonser för den här modellen än
När någon säljer en FINEO FO 10 visas annonserna och försäljningshistoriken här.
Sälj en likadanBeskrivning
The FO 10 is a passive full-range cabinet built around a 10-inch woofer with a ferrite magnet and a 1-inch compression driver. A constant directivity horn with an 80° x 60° dispersion pattern can be rotated by 90°, so the cabinet can stand upright, lie on its side or hang on its side while keeping suitable coverage. The enclosure is bass reflex and covers 71 Hz to 20 kHz (-6 dB).
The cabinet is made of MDF with an acrylic enamel finish and a coated steel front grille backed with acoustic foam. It is available in black or white, with special colours possible. Rigging points include M8 threads on the sides, bottom, top and back, plus a VESA 100 x 100 mm pattern on the back. Ball impact resistance is certified to DIN 18032-3, which allows use in sports-hall type environments, though the speaker is rated only for dry indoor areas.
Connection is through two NL4 Speakon sockets, one input and one parallel output. DSP presets and filter sheets are offered for amplifiers and processors from Lab.gruppen, LEA, Ashly, Biamp, BSS, Powersoft, QSC, Symetrix and others. The maker recommends the S118 or S218 subwoofers as partners.
Video
Specifikationer
- Märke
- HK Audio
- Modell
- FINEO FO 10
- Kategori
- Live-ljud › PA-högtalare
Audio
- Concept
- Passive 2-way mid/high unit
- Cabinet principle
- Bass reflex
- Power handling RMS
- 300 W
- Power handling program
- 600 W
- Power handling peak
- 1200 W
- Nominal impedance
- 8 Ohms
- Max. SPL average
- 119 dB
- Max. SPL peak
- 123 dB
- Sensitivity 1 W/1 m
- 91 dB
- Crossover frequency
- 2.9 kHz
- Frequency range -6 dB
- 71 Hz - 20 kHz
- Frequency range -10 dB
- 67 Hz - 20 kHz
- Dispersion angle -6 dB (H x V)
- 80° x 60°
Components
- Low frequency
- 1 x 10" Sica cone speaker with ferrite magnet and 2" voice coil
- High frequency
- 1 x 1" Sica compression driver with ferrite magnet and 1" voice coil
- Crossover
- High pass: 18 dB/oct., Low pass: 18 dB/oct.
- HF protection circuit
- PTC circuit
- Horn
- BEM optimized constant directivity horn, rotatable
Connectivity
- Input
- 1 x NL4 Speakon
- Output/parallel output
- 1 x NL4 Speakon
- Pin assignment
- 1+/- (input/parallel output), 2+/- (looped through)
Physical
- Cabinet material
- MDF
- Cabinet surface
- 1-component acrylic enamel
- Color
- Jet black (RAL 9005), Signal white (RAL 9003) or special color
- Front grille
- Steel grille with anticorrosive coating and backed acoustic foam
- Rigging
- 2 x M8 side, 2 x M8 bottom/lid, 1 x M8 back, 4 x M4 back (VESA MIS-D 100 x 100 mm)
- Dimensions (W x H x D)
- 32.1 x 52.1 x 32.8 cm
- Weight
- 15.2 kg
Certifications
- Ball impact resistance (DIN 18032-3)
- Certified (MPA Uni Stuttgart)
- IP protection class (EN 60529)
- Not specified (installation only in dry indoor areas)