DIG V2
Dual digital delay pedal that runs two linked delay lines with three rack-style voicings (ADM, 12 bit and 24/96). It suits guitarists, bassists and keyboard players who want syncable, MIDI-controllable delays in a compact stereo pedalboard unit.
- Two linked delays, 20 ms to 1.6 s each
- ADM, 12 bit and 24/96 delay voicings
- Series, parallel and ping pong routing
- Five subdivisions plus Free Mode for Delay 2
- Full MIDI via EXP/MIDI jack or USB-C, 300 presets
- True or buffered bypass, stereo in/out
Bilder
8Annonser
Inga annonser för den här modellen än
När någon säljer en DIG V2 visas annonserna och försäljningshistoriken här.
Sälj en likadanBeskrivning
DIG V2 combines two integrated delay machines in one pedal. Delay 1 acts as the master, with a time range of 20 ms to 1.6 s set by a knob or tap tempo. Delay 2 follows it through five rhythmic subdivisions (triplet, eighth, dotted eighth, dotted quarter and golden ratio), or runs independently in Free Mode over the same 20 ms to 1.6 s range. Three voicings model early 80s adaptive delta modulation, mid 80s 12 bit PCM and a modern 24 bit/96 kHz delay.
The two delays can be routed in series, parallel or ping pong. Other controls include separate Mix knobs, a shared Repeats knob with an optional separate Delay 2 repeats setting, three modulation levels (off, light, deep) and a Tone knob that works as a high cut to the left and a low cut to the right. Holding the TAP footswitch starts circular repeats, which hold the repeats at a steady level until the switch is released.
The input is a JFET preamp with a mono/stereo switch and a line/instrument level option that adds 10 dB of headroom. Bypass can be relay-switched true bypass (the default) or buffered. The EXP/MIDI jack and USB-C port give full MIDI control, MIDI Clock Sync and 300 preset locations. USB-C also handles firmware updates. The pedal needs a 9 V DC supply, which is not included.
Video
Specifikationer
- Märke
- Strymon
- Modell
- DIG V2
- Kategori
- Effekter och pedaler
Inputs
- Audio input
- High impedance ultra low-noise discrete Class A JFET TRS stereo input
- Input impedance
- 1M Ohm
- Input mode switch
- Mono (TS) or Stereo (TRS)
- Line level mode
- 10dB of added headroom
- Expression / control input
- TRS expression pedal, MiniSwitch, MultiSwitch Plus or TRS MIDI
Outputs
- Audio outputs
- Low impedance independent TS stereo outputs
- Output impedance
- 100 Ohm
Connectivity
- MIDI
- Via EXP/MIDI jack or USB-C
- USB
- USB-C for MIDI control and firmware updates
- MIDI presets
- 300 preset locations
- MIDI Clock Sync
- Supported, saved per preset
Audio
- Delay time
- 20ms to 1.6s
- Delay voicings
- ADM, 12 bit, 24/96
- Converters
- 24-bit 96kHz A/D and D/A
- Processing
- 520MHz ARM Superscalar processor, 32-bit floating point
- Frequency response
- 20Hz to 20kHz
- Bypass
- Relay true bypass (default) or buffered bypass
Controls
- Footswitches
- Tap Tempo and On/Off
- Routing options
- Series, Parallel, Ping Pong
- Modulation
- Off, light, deep
Power
- Power requirement
- 9V DC center-negative, 300mA minimum
- Power supply
- Not included
Physical
- Dimensions (D x W x H)
- 4.5" (11.43 cm) x 4" (10.16 cm) x 2.4" (6.1 cm)
- Chassis
- Pink aluminum
- Made in
- USA