PMC8-2 SUB
Active subwoofer with twin 8-inch drivers, ATL bass loading and two 400W Class-D amplifiers, reaching down to 25Hz. Aimed at professional reference monitoring in stereo, surround and immersive systems, either standalone or as an XBD cabinet.
- Twin 200mm (8") bass drivers with ATL bass loading
- 2 x 400W Class-D amplification
- Frequency response 25Hz - 500Hz (-3dB)
- Max continuous SPL 115dB @1m, peak 121dB @1m
- Analogue or AES3 digital XLR input, digital through output
- SoundAlign network control via RJ45; dedicated XBD mode
Bilder
5Annonser
Inga annonser för den här modellen än
När någon säljer en PMC8-2 SUB visas annonserna och försäljningshistoriken här.
Sälj en likadanBeskrivning
The 8-2 SUB is an active low-frequency monitor built around two 200mm (8-inch) bass drivers, each driven by its own 400W Class-D amplifier. Bass is loaded through an Advanced Transmission Line with an effective length of 3m. It has the same cabinet dimensions as the PMC8-2 midfield monitor and offers higher maximum SPL than the smaller PMC8 SUB.
A DSP engine handles driver protection, level trim, high-pass and low-pass filters, delay, phase inversion, shelving filters and a 5-band parametric EQ. Three user presets are stored alongside factory defaults. A dedicated XBD mode allows the unit to be paired with PMC6-2 or PMC8-2 monitors. Left-handed (SUB-L) and right-handed (SUB-R) cabinets are offered so the drivers can sit on the outer edges of a stereo array.
Signal arrives on an XLR input that switches between analogue and AES3 digital, with a digital AES3 through output. An RJ45 port connects to the browser-based SoundAlign interface for single or group settings, and an expansion card slot is reserved for future connectivity upgrades.
Specifikationer
- Märke
- PMC
- Modell
- PMC8-2 SUB
- Kategori
- Studio › Studiomonitorer
Audio
- Type
- Active subwoofer with twin 8-inch bass drivers and ATL bass loading
- Drive units
- LF PMC 200mm (8") studio 8 driver
- Effective ATL length
- 3m (9.8ft)
- Frequency response
- 25Hz - 500Hz (-3dB) (@1m full space, on-axis)
- Sensitivity
- +4dBu input signal = 98dB SPL @ 1m
- Max continuous SPL
- 115dB @1m
- Max peak SPL
- 121dB @1m
- Latency
- 2.4mS
- Amplifier power
- 2 x 400W Class-D (300Wrms per channel)
Inputs
- Input connector
- XLR, switchable between analogue and AES3 digital
- Analogue max input level
- +20/+24dBu (selectable)
- Analogue input impedance
- 22K ohm
- Digital input format
- 16/24-bit AES3, left, right or left + right
- Digital sample rate
- 18 - 192kHz
- Digital input impedance
- 110 ohm
- Expansion slot
- For future connectivity upgrades
Outputs
- Digital output
- XLR AES3 (fixed 24-bit @ 96kHz)
Connectivity
- Network
- RJ45 for PMC SoundAlign web interface
DSP and controls
- Level trim
- +/-10dB
- High-pass/Low-pass filter
- 20 - 200Hz, 12dB/Oct
- Delay
- 0 - 30mS
- Phase
- Normal or inverted
- Shelving filters
- LF & HF, 20Hz - 20kHz, +/-10dB, Q 0.707
- Parametric EQ
- 5 bands, 20Hz - 20kHz, +/-10dB
- User presets
- 3 + factory defaults
Power
- Mains
- 100 - 240VAC auto-switching, 50-60Hz (IEC C14)
- Power consumption (idle)
- 25W
- Power consumption (max)
- 800W
Physical
- Dimensions (H x W x D)
- 534mm (21") x 551mm (21.7") x 440mm (17.3")
- Weight
- 37.5kg (82.7lbs) each