2M Mono Verso
A mono phono cartridge for playing mono microgroove LP records, built for bottom-mount headshells. It carries a nude spherical diamond stylus and suits vinyl listeners with mono pressings.
- Mono cartridge for mono microgroove LP records
- Bottom-mount (Verso) configuration for headshells
- Nude spherical stylus, R18 µm, aluminium cantilever
- Strapped output works with any stereo phono stage
- 4 mV output at 1 kHz, 5 cm/s
- Tracking force 1.6-2.0 g, 1.8 g recommended
Bilder
5Annonser
Inga annonser för den här modellen än
När någon säljer en 2M Mono Verso visas annonserna och försäljningshistoriken här.
Sälj en likadanBeskrivning
The 2M Mono Verso is a moving magnet cartridge intended for mono microgroove LP records. This Verso version is configured for bottom-mount headshells, for turntables where the cartridge is fixed from underneath the headshell rather than on top.
It uses a nude spherical diamond stylus with an 18 µm tip radius on an aluminium cantilever. The strapped output sends the same signal from both sets of pole pins, so it can be used with a stereo phono stage and does not need mono-specific equipment. Output is 4 mV at 1 kHz, with a recommended tracking force of 1.8 g.
The body is made of polymer and aluminium in black and white. The cartridge weighs 7.2 g, and 16.7 g when premounted. Electrical loading is recommended at 47 kOhm and 150-300 pF. A replacement guide for the M2.0 mm top-plate screws is provided for the Verso mounting.
Specifikationer
- Märke
- Ortofon
- Modell
- 2M Mono Verso
- Kategori
- DJ-utrustning › Pickuper och nålar
Electrical
- Output voltage at 1 kHz, 5 cm/sec
- 4 mV
- Frequency response 20 Hz - 20 kHz
- 3 / - 1 dB
- Internal impedance, DC resistance
- 700 Ohm
- Internal inductance
- 350 mH
- Recommended load resistance
- 47 kOhm
- Recommended load capacitance
- 150-300 pF
Stylus
- Stylus type
- Nude Spherical
- Stylus tip radius
- R18 µm
- Cantilever material
- Aluminium
Tracking
- Tracking ability at 315 Hz
- 70 µm
- Compliance, dynamic, lateral
- 18 µm/mN
- Tracking force range
- 1.6-2.0 g (16-20 mN)
- Tracking force, recommended
- 1.8 g (18 mN)
- Tracking angle
- 20°
Physical
- Cartridge body material
- Polymer and aluminum
- Cartridge colour
- Black/White
- Cartridge weight
- 7.2 g
- Premounted cartridge weight
- 16.7 g
- Mounting type
- Half inch bottom mount