KM 120
The KM 120 is a miniature small-diaphragm condenser microphone with a side-fire figure-8 pattern, made from the KM 100 output stage and the AK 20 capsule. It suits engineers who want a compact, modular figure-8 mic, for example for MS stereo work.
- Side-fire figure-8 pattern, pressure gradient transducer
- Frequency range 20 Hz to 20 kHz
- Transformerless output stage, 48 V phantom power
- Switchable 10 dB preattenuation, up to 150 dB SPL
- Capsule can be separated from output stage by up to 50 m
- 3-pin XLR output, weight 102 g
Bilder
8Annonser
Inga annonser för den här modellen än
När någon säljer en KM 120 visas annonserna och försäljningshistoriken här.
Sälj en likadanBeskrivning
The KM 120 belongs to the KM 100 series, Neumann's first modular small-diaphragm microphone system. It pairs the KM 100 output stage with the AK 20 active capsule, a single-diaphragm pressure-gradient transducer with a 16 mm diaphragm and a figure-8 pattern. Response and output level are identical at 0° and 180° sound incidence.
The capsule and output stage can be unscrewed from each other. The capsule can be fitted to cables, extensions, swivel mounts, table stands, goose-necks, stereo mounts and hangers, and it can sit up to 50 m from the output stage on a 3 mm cable. Combined with another active capsule through the matching accessories, the AK 20 allows an MS stereo setup.
The output stage runs on 48 V phantom power with transformerless circuitry and a balanced output on a 3-pin XLR connector. A switchable 10 dB preattenuation raises the maximum SPL from 140 dB to 150 dB.
Video
Specifikationer
- Märke
- Neumann
- Modell
- KM 120
- Kategori
- Studio › Mikrofoner
Audio
- Directional pattern
- Side-fire figure-8
- Acoustical operating principle
- Pressure gradient transducer
- Frequency range
- 20 Hz ... 20 kHz
- Sensitivity at 1 kHz into 1 kohm
- 12 mV/Pa
- Equivalent noise level, CCIR
- 26 dB
- Equivalent noise level, A-weighted
- 17.5 dB-A
- Signal-to-noise ratio, CCIR (re. 94 dB SPL)
- 68 dB
- Signal-to-noise ratio, A-weighted (re. 94 dB SPL)
- 76.5 dB
- Maximum SPL for THD 0.5%
- 140 dB
- Maximum SPL for THD 0.5% with preattenuation
- 150 dB
- Preattenuation
- 10 dB switch
Outputs
- Rated impedance
- 50 Ohms
- Rated load impedance
- 1000 Ohms
- Maximum output voltage
- 10 dBu
- Output circuitry
- Transformerless, balanced
Connectivity
- Matching connector
- XLR 3 F
- Output connector
- 3-pin XLR
- Max. cable between capsule and output stage
- 50 m
Power
- Supply voltage (P48, IEC 61938)
- 48 V ± 4 V
- Current consumption (P48, IEC 61938)
- 2 mA
Physical
- Diameter
- 24/22 mm
- Length
- 110 mm
- Weight
- 102 g
- Capsule diaphragm diameter
- 16 mm