BX8 D3
The BX8 D3 is an 8-inch, two-way near-field powered studio monitor with a bi-amplified Class A/B design, intended for producers and engineers mixing in home or project studios. It has XLR and TRS balanced inputs and an Acoustic Space room control.
- 2-way near-field active monitor, 8-inch Kevlar woofer
- 1.25-inch natural silk dome tweeter in waveguide
- Bi-amplified Class A/B: 80 W LF + 70 W HF
- Frequency response 37 Hz – 22 kHz
- XLR and 1/4-inch TRS balanced/unbalanced inputs
- Acoustic Space control and front positioning LED
Bilder
7Annonser
Inga annonser för den här modellen än
När någon säljer en BX8 D3 visas annonserna och försäljningshistoriken här.
Sälj en likadanBeskrivning
The BX8 D3 is an active two-way near-field reference monitor. An 8-inch Kevlar woofer handles low and mid frequencies, and a 1.25-inch natural silk dome tweeter handles the highs, with a crossover at 2.0 kHz. The tweeter sits in a computer-optimised waveguide to control dispersion, and a flared rear port is used for low-frequency extension. The cabinet is vinyl-laminated MDF.
Each driver has its own Class A/B amplifier: 80 W for the woofer and 70 W for the tweeter, 150 W in total. Rear controls include a volume knob and an Acoustic Space control for reducing bass build-up and standing-wave problems caused by the room. A front-mounted LED helps locate the best listening position, and the front baffle uses a fastenerless design with no visible driver screws.
Inputs are a balanced XLR and a balanced/unbalanced 1/4-inch TRS connector, so the monitor can be fed from audio interfaces, mixers, synthesizers and DJ equipment. Protection covers RF interference, output current limiting, over-temperature, turn on/off transients and subsonic content, plus an external mains fuse.
Video
Specifikationer
- Märke
- M-Audio
- Modell
- BX8 D3
- Kategori
- Studio › Studiomonitorer
Audio
- Type
- 2-way near-field studio reference monitors
- Frequency Response
- 37Hz – 22kHz
- Crossover Frequency
- 2.0kHz
- Maximum Peak SPL
- 114dB SPL - Full Bandwidth Pink Noise Measured
- Polarity
- Positive signal at + input produce outward LF cone displacement
Drivers
- Low Freq. Driver
- 8 inch (203 mm) Kevlar curved cone with high temperature voice coil and damped rubber surround, magnetically shielded
- High Freq. Driver
- 1.25 inch (32mm) magnetically shielded natural silk dome
Amplification
- Low Freq. Amplifier Power
- 80W
- High Freq. Amplifier Power
- 70W
- Amplifier class
- Class A/B, bi-amplified
Inputs
- Input Connectors
- 1x XLR balanced input connector, 1x TRS balanced/unbalanced input connector
- Input Sensitivity
- -12dBU
- Input Impedance
- 10kΩ balanced, 20kΩ unbalanced
Controls
- Room adjustment
- Acoustic Space control
- Level
- Volume control
Protection
- Protection
- RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse
Power
- Voltage
- 100–120V, 50/60 Hz / 220–240V, 50/60 Hz
- Consumption
- 150W
- Fuse
- 220–240V~ T1AL, 250V / 100–120V~ T2AL, 250V
Physical
- Cabinet
- Vinyl-laminated high-acoustic-efficiency MDF
- Dimensions (W x D x H)
- 9.8" x 11.9" x 15.1" / 250 x 302 x 384 mm
- Weight
- 23.1 lb / 10.5 kg