F300
The F300 is a compact two-way, rear-ported bookshelf speaker for stereo hi-fi or home theatre use. A wall-mount bracket is pre-fitted to the rear panel, which suits tight spaces or use as a rear effects speaker. It is listed by the maker as discontinued.
- 2-way, rear-ported bookshelf speaker
- 125mm multi-fibre bass/mid and 25mm polyester dome tweeter
- Pre-fitted rear bracket for flush wall mounting
- 87dB sensitivity, 8 ohm nominal impedance
- Suits 20-70W RMS amplifiers
- Walnut, Black Ash or Light Oak finish
Bilder
8Annonser
Inga annonser för den här modellen än
När någon säljer en F300 visas annonserna och försäljningshistoriken här.
Sälj en likadanBeskrivning
The F300 is a two-way bookshelf speaker with a rear port. It pairs a 125mm multi-fibre bass/mid driver with a 25mm polyester dome tweeter, crossed over at 3.4kHz using a 2nd order low-pass and 3rd order high-pass network. Quoted in-room response is 54Hz to 28kHz (-6dB), with 87dB sensitivity and an 8 ohm nominal impedance.
A bracket is already fitted to the back of the cabinet, so the speaker can be mounted flush against a wall. This helps where shelf or floor space is limited, and it suits the speaker for rear effects duty in a home cinema system. It can equally serve as the main pair in a two-channel hi-fi system.
The maker recommends amplifier power of 20 to 70 watts RMS, and continuous power handling is 35 watts RMS. The cabinet measures 250 x 156 x 211mm and weighs 3.7kg each. Finishes are Walnut, Black Ash and Light Oak. The model sits in the F300 Series and is sold as a pair.
Video
Specifikationer
- Märke
- Fyne Audio
- Modell
- F300
- Kategori
- Hi-Fi och hemmaljud › Högtalare
Audio
- System type
- 2 way, rear ported
- Drive unit complement
- 1 x 125mm multi-fibre bass/mid, 1 x 25mm polyester dome tweeter
- Frequency response (-6dB typical in room)
- 54Hz - 28kHz
- Sensitivity (2.83 Volt @ 1m)
- 87dB
- Nominal impedance
- 8 Ohm
- Crossover frequency
- 3.4kHz
- Crossover type
- 2nd order low pass, 3rd order high pass
Power
- Recommended amplifier power
- 20 - 70 Watt RMS
- Continuous power handling
- 35 Watt RMS
Physical
- Dimensions (H x W x D)
- 250 x 156 x 211mm (9.8 x 6.1 x 8.3")
- Net weight (each)
- 3.7kg (8.2lb)
- Finishes
- Walnut / Black Ash / Light Oak
- Wall mounting
- Bracket pre-fitted to rear panel
- Sold as
- Per pair
General
- Series
- F300 Series
- SKU
- F8000003
- Status
- Discontinued