Ripped Speaker
Analog fuzz pedal for guitar and bass that covers lo-fi, broken-speaker style fuzz at low settings and heavy saturated fuzz when turned up. A bias control shapes gating and clipping, and an active tilt-style tone control adjusts brightness.
- Analog mono fuzz for guitar and bass
- RIP bias knob for gating and clipping character
- Active tilt-shift TONE control, flat at noon
- True bypass switching with LED
- 9V battery included; draws 10mA
- Compact size: 4.5 x 2.75 x 2.1 in
Bilder
7Annonser
Inga annonser för den här modellen än
När någon säljer en Ripped Speaker visas annonserna och försäljningshistoriken här.
Sälj en likadanBeskrivning
The Ripped Speaker is a mono analog fuzz pedal inspired by early distorted guitar and bass sounds, such as those from a damaged speaker cone, a loose tube or a faulty console channel. Low fuzz settings give a lo-fi, vintage character, while higher settings produce a fully saturated, modern fuzz.
Four knobs control the sound: Vol sets output level, Fuzz sets the input gain into the fuzz circuit, Tone is an active tilt-shift EQ that is flat at noon, darker and bassier counterclockwise and brighter with less low end clockwise. The Rip knob is a bias control that sets clipping at the top and bottom of the waveform. Noon is the most open and least compressed position; turning it either way gives gated, sputtering or choked textures, with clockwise producing a harder gate and counterclockwise a smoother fade-out.
The pedal uses true bypass switching with an LED status indicator. It has a 1/4" input (1MΩ) and a 1/4" output (100Ω), runs on an included 9V battery, and can also be powered from an optional EHX 9.6VDC-200mA adapter, which is sold separately.
Video
Specifikationer
- Märke
- Electro-Harmonix
- Modell
- Ripped Speaker
- Kategori
- Effekter och pedaler
Controls
- Volume knob
- Adjusts output volume
- Rip knob
- Bias control for clipping at top and bottom of the waveform
- Tone knob
- Active tilt-shift EQ, flat at noon
- Fuzz knob
- Input gain into the fuzz circuit
- Footswitch
- Toggles effect and true bypass
- Indicator
- LED lights when effect is engaged
Inputs
- Input jack
- 1/4"
- Input impedance
- 1MΩ
Outputs
- Output jack
- 1/4"
- Output impedance
- 100Ω
Audio
- Circuit
- Analog
- Bypass
- True Bypass
- Audio
- Mono
Power
- Power supply
- 9V battery included (optional 9.6VDC-200mA power adapter not included)
- Current draw
- 10mA
Physical
- Dimensions (in)
- 4.5 x 2.75 x 2.1
In the box
- Battery
- 9V battery included