Andy Summers Walking On The Moon
Electro-Harmonix Utgått Utgiven 2023

Andy Summers Walking On The Moon

Analog flanger pedal made as a tribute to the flanger tones of Andy Summers. It has Rate, Range and Color controls, a Filter Matrix mode and a separate dry output, and suits guitarists after classic shimmering flange or fixed filter sounds.

  • Analog flanger with Rate, Range and Color controls
  • Filter Matrix switch freezes the flanger into fixed filters
  • Separate Dry Out jack alongside the Flanged Out
  • True bypass with status LED
  • Runs on supplied 9V adapter, 40mA draw
  • Artist edition graphics and poster included
Sälj en likadan

Bilder

7

Annonser

Inga annonser för den här modellen än

När någon säljer en Andy Summers Walking On The Moon visas annonserna och försäljningshistoriken här.

Sälj en likadan

Beskrivning

The Walking On The Moon is an analog flanger built around three controls. Rate sets the modulation speed, from slow sweeps up to a vibrato-like flutter. Range sets the lower limit of the sweep, from a narrow sweep to one that reaches deep into the bass region. Color sets the intensity of the effect, from subtle chorus-like movement to a pronounced jet-style whoosh.

A Filter Matrix switch disconnects the modulation waveform from the flanger circuit. This freezes the flanger into a fixed set of filters that can add chime or metallic overtones without any movement. In this mode Range moves the position of the filters, Color sets the depth of filtering, and Rate has no effect.

The pedal has a mono input and two outputs: a main Flanged Out and a Dry Out that is connected directly to the input in all modes. A footswitch with a status LED engages the effect, and bypass is true bypass. It runs from the supplied 9V adapter or an optional 9V battery. The chassis carries artist edition graphics, and a poster is included.

Video

Specifikationer

Märke
Electro-Harmonix
Modell
Andy Summers Walking On The Moon
Kategori
Effekter och pedaler

Controls

Knobs
Rate, Range, Color
Switch
Filter Matrix
Footswitch
Bypass / effect with status LED

Audio

Circuit
Analog
Bypass
True Bypass
Audio
Mono
Effect type
Analog Flanger / Filter Matrix

Inputs

Input
1 x Input jack

Outputs

Flanged Out
Main audio output
Dry Out
Connected directly to Input in all modes

Power

Power supply
9.6VDC-200mA power adapter included (optional 9V battery not included)
Current draw
40mA
Plug polarity
Center-negative
Maximum voltage
Do not exceed 10.5VDC

Physical

Dimensions
4.75 x 4 x 2.25 in

In the box

Power adapter
9.6VDC-200mA
Poster
Walking on the Moon poster design by Laura Josephson

Software

Owner's manual
Download

Data: ehx.com; bilder: Electro-Harmonix product page · uppdaterad 2026-10-13 · Hittat ett fel? Skriv till oss